Revision as of 04:40, 18 November 2010

>= Under construction = THIS IS NOT FINAL.. feel free to edit.

Introduction

The Modprot is needed for more clean protocol extensions by eMule modders....

The main idea is to set a bit in CT_EMULE_MISCOPTIONS2 in the initial hello packet. If that bit is set and received by an eMule mod that is capable of processing extensions, then that mod will send the options it is capable of in the response and the first client will also send back the protocol extensions it is capable of.

Important:

Clients that are not capable of processing the mod protocol (like official eMule/aMule) will not set the mod bit in CT_EMULE_MISCOPTIONS2 and will never receive extended protocol information.

Documentation

All mod communication is to be done over the OP_MODPROT/OP_MODPACKEDPROT. When a hello(answer) with a set mod bit is received the ConnectionEstablished has to be delayed. Instead of that the mod info packet with the opcode OP_MODINFOPACKET is to be sent. ConnectionEstablished will be triggered when the mod info packet is received. <pre> A B Hello ---> MB Set (see if ModBit is set) MB Set <--- Hello Answer ConEst <--- MInfo (Mod Info) MInfo ---> ConEst (call ConnectionEstablished) </pre> The mod info packet has to contain eMuleTags that announce the supported features. The packet is made up this way: <pre> <uint 32> tag count <emule tag 1> <emule tag 2> ... <emule tag n> </pre> It's only allowed to use mod features it their capability was announced by both sides. After the capability exchange via OP_MODINFOPACKET all remaining opcodes are allowed to be used by clients in any way they want. All further communication is not part of this specification.

Protocol

Sending Hello(answer) packets

Setting the modbit in CT_EMULE_MISCOPTIONS2

in baseclient.cpp, void CUpDownClient::SendHelloTypePacket(CSafeMemFile* data) <pre> // eMule Misc. Options #2 const UINT uKadVersion = KADEMLIA_VERSION; const UINT uSupportLargeFiles = 1; const UINT uExtMultiPacket = 1; // Set the Mod Bit const UINT uModProt = 1; // mod bit // NEO: NMP - [NeoModProt] <-- Xanatos -- const UINT uSupportsCryptLayer = thePrefs.IsClientCryptLayerSupported() ? 1 : 0; const UINT uRequestsCryptLayer = thePrefs.IsClientCryptLayerRequested() ? 1 : 0; const UINT uRequiresCryptLayer = thePrefs.IsClientCryptLayerRequired() ? 1 : 0; const UINT uSupportsSourceEx2 = 1;

CTag tagMisOptions2(CT_EMULE_MISCOPTIONS2, // (RESERVED ) (uSupportsSourceEx2 << 10) | (uRequiresCryptLayer << 9) | (uRequestsCryptLayer << 8) | (uSupportsCryptLayer << 7) | (uModProt << 6) | (uExtMultiPacket << 5) | (uSupportLargeFiles << 4) | (uKadVersion << 0) ); tagMisOptions2.WriteTagToFile(data); </pre>

Processing hello(answer) packets

Read out the modbit from CT_EMULE_MISCOPTIONS2

baseclient.cpp bool CUpDownClient::ProcessHelloTypePacket(CSafeMemFile* data) <pre> case CT_EMULE_MISCOPTIONS2: // 21 Reserved // 1 Supports SourceExachnge2 Packets, ignores SX1 Packet Version // 1 Requires CryptLayer // 1 Requests CryptLayer // 1 Supports CryptLayer // 1 Reserved (ModBit) // 1 Ext Multipacket (Hash+Size instead of Hash) // 1 Large Files (includes support for 64bit tags) // 4 Kad Version if (temptag.IsInt()) { m_fSupportsSourceEx2 = (temptag.GetInt() >> 10) & 0x01; m_fRequiresCryptLayer = (temptag.GetInt() >> 9) & 0x01; m_fRequestsCryptLayer = (temptag.GetInt() >> 8) & 0x01; m_fSupportsCryptLayer = (temptag.GetInt() >> 7) & 0x01; // read the mod bit m_fSupportsModProt = (temptag.GetInt() >> 6) & 0x01; // NEO: NMP - [NeoModProt] <-- Xanatos -- m_fExtMultiPacket = (temptag.GetInt() >> 5) & 0x01; m_fSupportsLargeFiles = (temptag.GetInt() >> 4) & 0x01; m_byKadVersion = (uint8)((temptag.GetInt() >> 0) & 0x0f); dwEmuleTags |= 8; if (bDbgInfo) m_strHelloInfo.AppendFormat(_T("\n KadVersion=%u, LargeFiles=%u ExtMultiPacket=%u CryptLayerSupport=%u CryptLayerRequest=%u CryptLayerRequires=%u m_fSupportsSourceEx2=%u"), m_byKadVersion, m_fSupportsLargeFiles, m_fExtMultiPacket, m_fSupportsCryptLayer, m_fRequestsCryptLayer, m_fRequiresCryptLayer, m_fSupportsSourceEx2); m_fRequestsCryptLayer &= m_fSupportsCryptLayer; m_fRequiresCryptLayer &= m_fRequestsCryptLayer; </pre>

Sending hello answer and modprot info

Listensocket.cpp bool CClientReqSocket::ProcessPacket(const BYTE* packet, uint32 size, UINT opcode) <pre>if (client->GetHashType() == SO_EMULE && !bIsMuleHello) client->SendMuleInfoPacket(false);

client->SendHelloAnswer();

if (client) { // NEO: NMP - [NeoModProt] -- Xanatos --> if(client->GetNeoModProtVersion()) client->SendModInfoPacket(); </pre>

Example of SendModInfoPacket:

<pre> void CUpDownClient::SendModInfoPacket(){ if (socket == NULL){ // first we check if we have a valid socket, actualy we was called form the socket so this check is rather unnesesery, but in case ASSERT(0); return; }

CSafeMemFile data(128);

// write the amount of emule tags we intent to send // !!! this value must be correct !!! uint32 tagcount=2;

// write the first tag (Nr.1) // in this sample its an normal tag with an uint8 ID, its the modstring 0x55 = 'T' data.WriteUInt32(tagcount); // nr. of tags CTag tagPartStatus(0x55,_T("TestMod")); tagPartStatus.WriteNewEd2kTag(&data);

// write the secund tag (Nr.2) // in this sample its an custom named tag with an string as ID CTag tagMyMail("Mod:eMail",_T("User@Domain.com")); tagMyMail.WriteNewEd2kTag(&data);

// we are done writing tags

// now we create a packet and put what we have writen in it Packet* packet = new Packet(&data,OP_MODPROT); packet->opcode = OP_MODINFOPACKET; if (thePrefs.GetDebugClientTCPLevel() > 0) DebugSend("OP__ModInfoPacket", this); theStats.AddUpDataOverheadOther(packet->size); socket->SendPacket(packet,true,true); // we send the packet } </pre>

Delaying ConnectionEstablished & sending the mod info packet

listensocket.cpp bool CClientReqSocket::ProcessPacket(const BYTE* packet, uint32 size, UINT opcode) <pre> case OP_HELLOANSWER: { theStats.AddDownDataOverheadOther(size); client->ProcessHelloAnswer(packet,size); if (thePrefs.GetDebugClientTCPLevel() > 0){ DebugRecv("OP_HelloAnswer", client); Debug(_T("  %s\n"), client->DbgGetHelloInfo()); }

// NEO: NMP - [NeoModProt] -- Xanatos --> if(client->SupportsModProt() == 0) // check for mod prot // we will start the SUI when we recieve the mod info packet // NEO: NMP END <-- Xanatos -- { // start secure identification, if // - we have received OP_EMULEINFO and OP_HELLOANSWER (old eMule) // - we have received eMule-OP_HELLOANSWER (new eMule) if (client->GetInfoPacketsReceived() == IP_BOTH) client->InfoPacketsReceived(); }

if (client) { // NEO: NMP - [NeoModProt] -- Xanatos --> if (client->SupportsModProt()) // if this cleint uses mod protocol extensions client->SendModInfoPacket(); // we send him the mod info packet with our rxtensions else // we *dont* call ConnectionEstablished at this point, // when will call ConnectionEstablished when we recieve the Mod Info frm this cleint // NEO: NMP END <-- Xanatos -- { client->ConnectionEstablished(); theApp.emuledlg->transferwnd->clientlistctrl.RefreshClient(client); } } break; } </pre>

listensocket.cpp bool CClientReqSocket::ProcessPacket(const BYTE* packet, uint32 size, UINT opcode) <pre> case OP_HELLO: { [..................]

if (client) { // NEO: NMP - [NeoModProt] -- Xanatos --> if(client->SupportsModProt()) // if this cleint uses mod protocol extensions client->SendModInfoPacket(); // we send him the mod info packet with our rxtensions else // we *dont* call ConnectionEstablished at this point, // when will call ConnectionEstablished when we recieve the Mod Info frm this cleint // NEO: NMP END <-- Xanatos -- client->ConnectionEstablished(); }

ASSERT( client ); if(client) { // NEO: NMP - [NeoModProt] -- Xanatos --> if(client->SupportsModProt() == 0) // check for mod prot // we will start the SUI when we recieve the mod info packet // NEO: NMP END <-- Xanatos -- {

// start secure identification, if // - we have received eMule-OP_HELLO (new eMule) if (client->GetInfoPacketsReceived() == IP_BOTH) client->InfoPacketsReceived(); }

if( client->GetKadPort() ) Kademlia::CKademlia::Bootstrap(ntohl(client->GetIP()), client->GetKadPort(), (client->GetKadVersion() > 1)); } break; } </pre>

Processing the modinfo packet

listensocket.cpp <pre> bool CClientReqSocket::ProcessModPacket(const BYTE* packet, uint32 size, UINT opcode, UINT uRawSize) { try { try { if (!client) { theStats.AddDownDataOverheadOther(uRawSize); throw GetResString(IDS_ERR_UNKNOWNCLIENTACTION); } if (thePrefs.m_iDbgHeap >= 2) ASSERT_VALID(client);

switch(opcode) { case OP_MODINFOPACKET: { if (thePrefs.GetDebugClientTCPLevel() > 0) DebugRecv("OP__ModInfoPacket", client); theStats.AddDownDataOverheadOther(uRawSize);

if(client->GetNeoModProtVersion() == 0) throw CString(_T("Recieved Neo Mod Info Packet from a cleint whitch doe snot support this feature!"));

client->ProcessModInfoPacket(packet,size);

// Now after we have all informations about the cleint the connection is established client->ConnectionEstablished();

// start secure identification, if // - we have received OP_MODINFOPACKET, (Neo Compatible new eMule mods) if (client->GetInfoPacketsReceived() == IP_BOTH) client->InfoPacketsReceived(); break; }

// NEO: NMPm - [NeoModProtMultiPacket] case OP_MODMULTIPACKET: { ... </pre>

baseclient.cpp <pre> void CUpDownClient::ProcessModInfoPacket(const uchar* pachPacket, uint32 nSize) { bool bDbgInfo = thePrefs.GetUseDebugDevice(); CString m_strModInfo; CSafeMemFile data(pachPacket, nSize);

// we read now the amount of tags that the sender put in th epacket uint32 tagcount = data.ReadUInt32(); if (bDbgInfo) m_strModInfo.AppendFormat(_T(" Tags=%u"), (UINT)tagcount); // now we are going to read all of them for (uint32 i = 0; i < tagcount; i++) { CTag temptag(&data, false); switch (temptag.GetNameID()) // here we distinguish only tags with an uint8 ID, all named tags are handled below { case 0x55: if (temptag.IsStr()) Log(_T("ModString %s", temptag.GetStr())); else if (bDbgInfo) m_strModInfo.AppendFormat(_T("\n ***UnkType=%s"), temptag.GetFullInfo()); break;

default:

// now we habdle custom named tags, we use a series of (else)if's and strcmp, note: this is *not* unicide!!! if(strcmp(temptag.GetName(),"Mod:Hello") == 0) { if(temptag.IsStr()) Log(LOG_SUCCESS,_T("*** Greathings from %s: %s"),GetUserName(),temptag.GetStr()); } else

if (bDbgInfo) m_strModInfo.AppendFormat(_T("\n ***UnkTag=%s"), temptag.GetFullInfo()); } }

// some debug output if (bDbgInfo && data.GetPosition() < data.GetLength()){ m_strModInfo.AppendFormat(_T("\n ***AddData: %u bytes"), data.GetLength() - data.GetPosition()); } }

</pre>

Processing mod data example

EMSocket.cpp void CEMSocket::OnReceive(int nErrorCode) <pre> switch (pendingPacket->prot){ case OP_EDONKEYPROT: case OP_PACKEDPROT: case OP_EMULEPROT: // NEO: NMP - [NeoModProt] -- Xanatos --> // We have to accept also mod packet case OP_MODPACKEDPROT: case OP_MODPROT: // NEO: NMP END <-- Xanatos -- break; default: EMTrace("CEMSocket::OnReceive ERROR Wrong header"); delete pendingPacket; pendingPacket = NULL; OnError(ERR_WRONGHEADER); return; } </pre>

listensocket.cpp bool CClientReqSocket::PacketReceivedCppEH(Packet* packet) <pre> // NEO: NMP - [NeoModProt] -- Xanatos --> // dispatch mod packets to the right processing functions case OP_MODPACKEDPROT: if (!packet->UnPackPacket()){ if (thePrefs.GetVerbose()) AddDebugLogLine(false, _T("Failed to decompress client Mod TCP packet; %s; %s"), DbgGetClientTCPPacket(packet->prot, packet->opcode, packet->size), DbgGetClientInfo()); bResult = false; break; } case OP_MODPROT: bResult = ProcessModPacket((const BYTE*)packet->pBuffer, packet->size, packet->opcode, uRawSize); break; </pre> <pre> // NEO: NMP - [NeoModProt] -- Xanatos --> bool CClientReqSocket::ProcessModPacket(const BYTE* packet, uint32 size, UINT opcode, UINT uRawSize) { try { try { // we must have a cleint at this point !always! if (!client) { theStats.AddDownDataOverheadOther(uRawSize); throw GetResString(IDS_ERR_UNKNOWNCLIENTACTION); } if (thePrefs.m_iDbgHeap >= 2) ASSERT_VALID(client);

switch(opcode) // dispatch particular packets { // for the mod prot v1 (capability exchange) only this one packet is relevant, the mod info packet case OP_MODINFOPACKET: { if (thePrefs.GetDebugClientTCPLevel() > 0) DebugRecv("OP__ModInfoPacket", client); theStats.AddDownDataOverheadOther(uRawSize);

if(client->SupportsModProt() == 0) // just pure formality throw CString(_T("Recieved Neo Mod Info Packet from a cleint whitch doe snot support this feature!"));

// Process the packet client->ProcessModInfoPacket(packet,size);

// Now after we have all informations about the cleint the connection is established client->ConnectionEstablished();

// start secure identification, if // - we have received OP_MODINFOPACKET, (Neo Compatible new eMule mods) if (client->GetInfoPacketsReceived() == IP_BOTH) client->InfoPacketsReceived(); break; }

default: // handle unknown packets

theStats.AddDownDataOverheadOther(uRawSize); PacketToDebugLogLine(_T("ModProt"), packet, size, opcode); } } catch(CFileException* error) { error->Delete(); throw GetResString(IDS_ERR_INVALIDPACKAGE); } catch(CMemoryException* error) { error->Delete(); throw CString(_T("Memory exception")); } } catch(CString error) { if (thePrefs.GetVerbose() && !error.IsEmpty()) DebugLogWarning(_T("Error: %s - while processing Mod packet: opcode=%s size=%u; %s"), error, DbgGetMuleClientTCPOpcode(opcode), size, DbgGetClientInfo()); // Note: don't disconnect cleints on mod prot errors, the extensions are just addons and if thay fail the client will work anyway //if (client) // client->SetDownloadState(DS_ERROR, _T("ProcessModPacket error. ") + error); //Disconnect(_T("ProcessModPacket error. ") + error); //return false; } return true;

// NEO: NMP END <-- Xanatos -- </pre>

Additional modifications

Packets.cpp void Packet::PackPacket() <pre> // NEO: NMP - [NeoModProt] -- Xanatos --> if( prot == OP_MODPROT ) prot = OP_MODPACKEDPROT; else // NEO: NMP END <-- Xanatos -- if( prot == OP_KADEMLIAHEADER ) prot = OP_KADEMLIAPACKEDPROT; else prot = OP_PACKEDPROT; </pre>

Packets.cpp bool Packet::UnPackPacket(UINT uMaxDecompressedSize) <pre> // NEO: NMP - [NeoModProt] -- Xanatos --> if( prot == OP_MODPACKEDPROT ) prot = OP_MODPROT; else // NEO: NMP END <-- Xanatos -- if( prot == OP_KADEMLIAPACKEDPROT ) prot = OP_KADEMLIAHEADER; else prot = OP_EMULEPROT; </pre>

Backward compatibility

The modstring is still send via hello(answer) packets but only if the remote client is using a mod and does not support the mod prot extension to maintain backward compatibility. Usage of CT_MOD_VERSION is proposed to move it to the mod protocol. A mod using the modbit MUST identify itself either via CT_MOD_VERSION in the hello(answer) packets or via modstring in the modinfo packet. NOTE: a mod that uses extensions but refuses to identify itself will most likely be considered a bad mod by some antileecher systems

The proposed check to use would be like <pre> void CUpDownClient::SendHelloTypePacket(CSafeMemFile* data) { ... ... uint32 tagcount = 6;

if( theApp.clientlist->GetBuddy() && theApp.IsFirewalled() ) tagcount += 2;

//>>> MODPROT::Send Modstring to old mods only const bool bSendModString = !SupportsModProt() && (!m_strModVersion.IsEmpty() || !m_pszUsername); if(bSendModString) ++tagcount; //<<< MODPROT::Send Modstring to old mods only

data->WriteUInt32(tagcount); ... ... tagMuleVersion.WriteTagToFile(data);

//>>> MODPROT::Send Modstring to old mods only if(bSendModString) { CTag tagMod(CT_MOD_VERSION, L"My Mod String"); tagMod.WriteTagToFile(data); } //<<< MODPROT::Send Modstring to old mods only

uint32 dwIP; uint16 nPort; ... ... </pre> and similar for the info packet.

OPCODE defines

<pre> OP_MODPROT 0x4D OP_MODPACKEDPROT 0x6D OP_MODINFOPACKET 0x01 </pre>

TAG defines

Tags used must be reserved in modprot topic at http://forum.emule-project.net/ Sources must be published within 3 months after claiming a tag.

The range 0x01 - 0x1F is completely reserved.

Tags in the range from 0x20 - 0x7E are reserved for major features, possible objections can be:

1. Modder uses too many tags (if you need more than 5 tags you are most likely doing something wrong. Note that string tags are also available - those are not regulated)
2. Utterly useless or unimplementable feature (no other mod will ever use it)
3. Illegal feature (should be clear)

The range 0x7F-FF is open and you can claim any free tag you want, only objection can be the usage of too many tags (e.g. someone claims to need a range from 0x80 to 0xAF).

• MISC_PROTOCOL_EXTENSIONS:

  [bit 1]   // Unsolicited Part Status (idea from netfinity, allows our client ro recieve filestatus at any time)
  [bit 2]   // LowID UDP Ping Support (notifyes a fix form xman1 that  allow the remote low ID to use udp reasks)
  [bit 3]   // ICSv2 New Official Version
  [bit 4]   // UDP Mod File Status*
  [bit 5]   // NATT - [NatTraversal], XSB - [XSBuddy], RPT - [ReuseTCPPort]
  [bit 6]   // NXS - [NeoXS]
  [bit 7]   // SF comments v2
  [bit 8]   // SCT
  [bit 9]   // L2HAC

<nowiki>*</nowiki> The UDP Mod File Status bit is not only used for ICS but used in general. It also tells whether Mod Multi Packet with extended mod status should be sent over UDP or not.

See also

References to emule protocol...